New furnace installed in a New Jersey basement

Furnace Replacement Projects in New Jersey

Furnaces

Furnace replacements we have carried out across Toms River and Ocean County. Ocean County’s 99% heating design temperature is 14°F, so a system here has to hold its setpoint on the coldest nights while cycling constantly through a long, damp shoulder season.

Before and after

Drag the handle across each photo to see the same installation before and after.

Air handler and ductwork replacement beforeAir handler and ductwork replacement afterBeforeAfter
Air handler and ductwork replacementOld air handler and corroded connections replaced, with new supply plenum and sealed joints.

Basement and crawl space replacements

Most of the older housing stock around Toms River puts the furnace in a basement, a crawl space or a utility closet. Access is usually the first problem to solve.

Furnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey homeFurnace replacement in a New Jersey home
Furnace and air handler installed in a utility closet
Aging basement gas furnace with its access panel open, showing worn wiring and an old flexible gas line before replacement
New furnace with gas line installed after replacement
Air handler installed above a laundry area
New gas furnace installed in a New Jersey basement
Old gas furnace beside a water heater in a utility closet with aging metal ductwork before replacement
Replacement furnace and water heater installed in a home utility room
Blower wheel removed from a residential HVAC system before cleaning
Mini split service in progress in a New Jersey home
Old basement furnace before replacement
Furnace with newly installed venting and piping after replacement
Wall-mounted mini split before and after installation
Mini split indoor unit and outdoor condenser installed at a home

Gas piping, venting and combustion

A replacement is not finished when the unit is set. Gas piping, venting and combustion all have to be right, and verified. The analyser readings below were taken on a completed installation.

Gas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installationGas piping and venting on a furnace installation

Every replacement is permitted and inspected. That is not an optional step. It is what keeps your records clean when you sell the house, and it means an independent inspector has confirmed the work meets code.

What we check before quoting a replacement

Sizing is done from a room-by-room load calculation, not a rule of thumb. An oversized furnace short cycles, which wears ignitors, flame sensors and blower motors faster, and in our climate a furnace already cycles constantly from October into April. We also look at the ductwork before quoting equipment, because leaky or undersized ducts will undermine any system.

On video

Furnace and water heater work, filmed on site.

Furnace and water heater in a basement installation

See all our project videos

Read more about furnace repair in Toms River or getting your heating system ready for winter.

Thinking about replacing your furnace?

We will tell you honestly whether it is worth keeping, and quote the replacement only if it makes sense.